Skip to content
scurfa7.jpg

Scurfa Watches are relatively new, and still reasonably unknown. They starter out by Paul Scurfield, who announced his new watch brand on Watchuseek in February 2014. Paul is a saturation diver in the North Sea and was frustrated with the overpriced dedicated diving watches with poor specs. So, he set out to launch his own diving watch brand.

Of course, as this brand is based in the UK, I am in full support of them naturally. But, I honestly believe that the Silicon, the latest model of Scurfa’s is a steal at only £124. This is mainly because of its excellent build quality, plus its impressive specs of Swiss movement (even if it is quartz), thick sapphire crystal with impressive AR coating, extremely strong lume, and also a ceramic bezel insert – making it possibly the cheapest watch to have one. 

Let’s take a closer look to see why it’s so good for the price.

scurfa1.jpg

The case

The case is a simple, unremarkable affair. It’s plain to see that the focus of the Diver 1 Silicon is function. Yet, it still manages to be pleasant on the wrist, and I actually quite like the rugged shape of it.

scurfa9.jpg

It’s completely brushed, bar the polished caseback – a good idea for diving, as it’ll be more scratch resistant and look smarter for a lot longer.

scurfa32.jpg

It’s a fairly average size for a modern diver, with a 42mm diameter, 51mm lug to lug length and a height of 13.5mm. Although the lug to lug length is normal for the size, they do seem a bit larger, due to their aggressive angular cut-off at the ends. The height is good too, as its thick enough to provide a bit of heft to the watch whilst being thin enough for everyday wear. Then finally, the 42mm diameter is a size that’s become almost the standard for dive watches recently.

scurfa5.jpg

The Scurfa Silicon has a very thick sapphire crystal. It’s domed, so although you get distortion at right angles, it means it doesn’t reflect like a mirror under water as a flat crystal would. Being a dedicated divers watch, only a sapphire crystal with it its high level of 9 on the MOHs scale of hardness will do. For the price, it has a rather impressive anti-reflective coating on the underside which gives you a brilliant flash of blue when you catch the light.

scurfa12.jpg

The bezel is quite possibly the most impressive part of the entire watch. It’s 120 click, with a deliciously smooth action, providing suitable audible clicks at each point. But that’s not the impressive thing – it’s the ceramic insert that is. Only the Parnis watches with ceramic inserts are cheaper that I’ve found, so for a new watch brand to offer something like this on a watch costing £124 is great. The engraving within the insert are all surprisingly accurate too, much better than the usual Chinese watch such as the Parnis. The markings are all filled with seriously epic lume, which is the same colour and strength as the lume on the dial. Simply put, it’s very good – in fact, I believe it’s better than the lume found on the Seiko Monster and SKX007. And that’s saying something. It’s strong, charges in the blink of an eye, and lasts a very long time. This has been a real key feature to me.

scurfa22.jpg scurfa28.jpg

The 7mm screw-in crown is brushed to match the case, and is accurately sculpted and is clearly made for purpose. It has sharp and clean teeth, perfect for gripping, but with the added characteristic of a red band around the centre. A small warning: I have found that the band can half come off when you use the crown, so always check it’s fully on. It’s a pleasant injection of colour, matching the only other red of the watch – the Diver 1 printed on the bottom half of the dial.

scurfa26.jpg

The crown has the D1 logo deeply etched in the end, which is in a fitting font style to match the watch.

scurfa25.jpg

The Diver 1 Silicon has a screw-in caseback, which is required for the water resistance. It’s fully polished, and simple in its design. In the centre, you find the Scurfa Watches logo, which is surrounded by various watch specifics around the outer edge, such as the water resistance, sapphire crystal, Swiss movement, and grade of stainless steel (316L). It’s not really got a design as such, but it’s acceptable in a purpose-fit watch such as this one. The engravings are all deep, accurate, and although the caseback is simple in looks, it’s definitely not been left behind in quality of manufacture.

scurfa21.jpg

As a purpose built divers watch, the water resistance rating would have to be good enough – which it is at 300m. This is suitable for scuba diving and is good enough to cope with any usual depths.

Rugged and simple, the case has proved to be very good quality for the money. It certainly looks more expensive than it is – thanks to the brilliant appearance of the ceramic bezel and sapphire crystal with its AR coating.

scurfa19.jpg

The dial

Let’s be honest, the Scurfa Diver 1 Silicon is, in effect, a modern adaptation of the Submariner. But aren’t many modern dive watches?

The dial is set off by its matt black base, which is offset well by the thick, chunky hands and hour markers. Readability is very high due to this, which no doubt is quite important during diving.

scurfa20.jpg

These aggressive hour markers and matching hands are all filled with the same exceptional lume as the bezel insert, with polished steel borders. They all reflect the light in an engaging way, that really catches the eye when coupled with the reflective bezel and the crystal. 

The hour markers are all batons, bar the triangle located at 12. Simplicity is best in many cases – this being one of them. The quality of the markers is flawless, both in manufacturing and application. Rather impressive for the price.

scurfa29.jpg

The hour and minute hands are both thick batons too, but with a slight pinch towards the end creating a stumpy point. The seconds hand is a simple thin stick, with a thin, elongated arrowed base. It also has a very nice touch of a lume filled arrow approximately two thirds up, which is equally surprisingly well assembled considering the small intricate nature of it.

scurfa17.jpg

The date wheel will probably be the talking point of a fair few, as some prefer to have one that matches the dial colour (in this case black). But, I believe that white is the correct choice, as the Diver 1 Silicon is all about function as a divers watch. Therefore I believe the white date wheel provides better readability than it would do if it was black with white type, matching the dial and merging into it.

The date window itself is simply but accurately cut out of the dial, with a subtle yet interest arousing white border surrounding it.

scurfa3.jpg

The printing throughout the dial is simple and kept to a minimum. We have the Scurfa Watches logo located in the top half, with “Diver One” in the bottom half. Then all that remains is a simple dashed minute track and the border around the date wheel. All printing is fine, crisp and precise.

scurfa29.jpg

It’s more clear than ever that the Diver One Silicon is meant for diving. Thanks to its bold hands and hour markers, staggering lume and simple design, it seems perfect for the job. I’m quite pleased that the practicality of the watch hasn’t killed it visually though. I personally still think it looks cool and is well designed, even though it has been kept uncomplicated. The execution of the dial is highly impressive, especially for a watch at this price.

scurfa10.jpg

The strap

The strap provided on the Diver 1 Silicon is… funnily enough, silicon rubber. It measures in at 22mm wide at the lugs, reducing to 20mm at the buckle. It seems to be an after market strap, as there is no sign of any customisation or markings on it. This is a shame, as it almost gives it a feeling of being an afterthought, but let’s be honest, straps on watches costing this much are usually pretty cheap and poor if they’re customised.

scurfa8.jpg

But, to be fair, the strap used here is definitely fit for purpose. It fits the curve of the case very well indeed and is such a tight for its a bit of a nightmare getting it back on if you like to swap your straps around.

The silicon does pick up fluff as is expected. It feels decent quality too, as it is soft to the touch, not stiff at all, but rather supple offering a decent wear. It’s simple in design too, matching the rest of the watch. The only bit of detailing is a bulge down the centre of the top, and a criss-cross mesh pattern on the underside.

scurfa14.jpg

scurfa15.jpg

The buckle is also plain, devoid of any markings or design cues. It’s chunky though, in a reassuring way that provides comfort that it won’t let you down. It’s fully brushed, and manufactured well.

scurfa13.jpg

The strap used is definitely for practicality. Rightly so, too. This is a full-on dive watch after all. And for that, this strap will no doubt do a fantastic job. But, if you want to wear the watch in a more casual setting – then I would recommend putting it on a leather strap. I’ve put it on the brown leather strap from my Christopher award C11 chrono, and I think it look fantastic. Much like the Seiko SKX007, it seems to take on a different view demeanour when on a leather strap. It’s much softer to the eye, and more attractive too I think. So there you go, a watch that will work well both in its main purpose and whilst you wear it casually too.

The movement

Paul specified that it had to be quartz in his diving watches. Mainly because of three reasons: they don’t stop if you don’t wear them, they aren’t as fragile as autos, and they aren’t effected as much by magnetism.

515_M_front

It’s a pleasant surprise to have a Swiss Made movement within the Scurfa, namely the Ronda 515. This movement has a whopping one jewel and it ain’t afraid to use it. The battery will last you approximately 4 years, and has an accuracy of -10/+20 seconds a month, which is about usual for a decent quartz movement. It’s well regarded as a hard wearing workhorse movement, with no issues at all. It’ll serve you for a good many years of diving with the Diver 1 Silicon. 

The competition

If you’re looking at watches around the same price range of ~£120 then there’s really no other option than the Seiko SKX007. Excellent build quality, tool-like appearance, certified ISO diver rating, and literally thousands upon thousands of supporters mean it’s one you simple can’t discount.

skx007-16.jpg

But that’s not the only decent diver in this price range. There’s also the Orient Mako, which also boasts an in-house automatic movement as does the Seiko. The Mako is a little smarter and more refined in appearance than the SKX007, so it’s a perfect alternative.

OrientMako-2.jpg

If you want a watch that is Swiss Made, and is on a higher level, then the Christopher Ward C60 Trident Pro 600 is an excellent option. Coming in at £600, it also has a ceramic bezel insert, but also has exceptional build quality. It boasts an impressive 600m water resistance.

trident600-22.jpg

Final comments

There is talk that Paul will eventually release an automatic version. I feel that if that’s true, that watch will become an incredibly popular watch as long as it stays affordable. In the meantime, though, I do believe that you’ll be extremely hard pushed to find a better dedicated divers watch with these specs at this price. Yes there’s the Seiko Monster and SXK007, but they’re seen everywhere. It’s always good to find a new, relatively unknown brand offering a watch that can genuinely take on the big boys.

scurfa18.jpg

Therefore, with its Swiss movement, ceramic bezel insert, thick sapphire crystal, and extreme lume, the Scurfa Diver 1 Silicon is one hell of a watch for £124. If you dive, then I absolutely recommend one. If you like dive watches, but don’t actually dive (like me), then still go buy one.

scurfa3.jpg scurfa5.jpg

Share

facebook twitter linkedin
View comments 7

7 comments

  1. Francesco

    Thanks for the amazing review, Joshua. I own a Scurfa Diver One: NATO. It’s smaller (40 mm) and the steel (the same 316L “surgical” that the Silicon boasts) is coated in black PVD.
    It does have a more “tactical” appearance, and it comes with three (!) straps (silicon, “lightweight” NATO and “ZULU” NATO) in a plastic German-manufactured Twist Box the same type of box used to supply a range of spare parts to the diving and offshore industry. Same price as the Silicon.
    The (Swiss) Rhonda quartz movement is a very nice touch; a reminiscence of my all-time favorite diving watch: a Luminox Original Navy SEAL (3000 series). Sure: Luminox is lighter and sports no steel, but it does its job perfectly. As I expect the Diver One: NATO will.
    I am quite satisfied with my purchase (I managed to thank Paul with a personal message for his creation); the only (very small) remark I can think of is that sometimes the movement of the seconds’s hand seems “off” the minute markers within the dial. Possibly it’s just an impression, or an odd refraction caused by my reading glasses from time to time.
    Anyway: I am quite happy. Paul’s creations are nice and “tough cookies”. I am happy I got one.

  2. Camberwell

    I thought that the Orient Mako was not a true divers in that it is not rated for scuba? On their website it says ‘Skin Diving Only’….I’m waiting for the D2, but otherwise I will be ordering a D1 Silicon for my dive trip later this year.

  3. Compa

    Althought I already bought it and it’s en route to me, it’s always good to find a review of this watch. The amount of reviews is too damn low! Thank you for al the info provided. Thanks to this video, I learned the Ronda movement is the swiss made version instead of the swiss parts version, I also had a good idea of how it will look on my wrist since I’m also a 7.25″ wrist person.
    Great shots, great video, I also liked the analysis you did under a macro lens and was also able to see the AR coat effect. Lovely! I didn’t knew the red o-ring was so easy to take away, would have prefferec a painted red line in the crown but this rubber ring gives the option to remove and use the watch without it.
    Great review, great review man!

  4. New Diver One Silicon from scurfa watches - Page 56

    […] of reviews, not sure if this has already been posted but I Think it's a great review Scurfa Diver One Silicon Watch Review | Watch It All About Reply With […]

  5. Scurfa = Top notch customer service.

    […] the works and should be up soon. In the meantime you can check this nice review of the Diver One : Scurfa Diver One Silicon Watch Review | Watch It All About You can email Paul directly if you want to order 🙂 Reply With […]

  6. chris benten

    Nice review. I have the watch and love it. Do you still have the red crown o-ring? Lost mine and Scurfa has no replacements. I suppose I can measure the crown and find one somewhere but I do like the red.

    1. Joshua Clare-Flagg

      It’s tried to escape a number of times, so it’s definitely something for prospective buyers to be aware of. If you find a replacement please share where you got it from!

Leave a comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Most popular articles

watchit-23-josh-james

Search...

Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors